Wastewater & Flood Recovery Vacuum System

Description

Wastewater & Flood Recovery Vacuum System

The RGV Gas Vac is an engine-powered, water recovery system with a pump out. It can be used with either one or two separate pickup devices and is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up water after a fire or flood.

The unique polyethylene separation tanks are non-corrosive, weigh significantly less than 50-gallon steel drums, and have access to the inside for periodic cleaning & maintenance with a quick lift-off lid. Open the large 1½” valve to purge sludge/solids that settle at the bottom. Each separation tank has an automatic transfer system that pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted, with no heavy tipping to dump your tanks.

(For use with cold water or hot water up to 90°C)

			Transfer Pump Plug Air Throttle Valve
RGV40: GAS ENGINE DRIVE VACUUM RECOVERY SYSTEM
PART #	DESCRIPTION	WEIGHT
HYD RGV40V12*	95 l/min,425 CFM, 14”Hg, 4.8m  Lift, 627cc Vanguard Elec. Start	242 kg
HYD RGV40H12*	95 l/min,425 CFM, 14”Hg, 4.8m  Lift, GX630 Honda Elec. Start	242 kg
Features			Using vaccum tools such as a vacuum arch ATP40 or a Twister Vacuum ANTV5 will increase your efficiency
•Vacuum and pump out simultaneously and automatically, no loss of suction or lost time dumping tanks
•12v Transfer pumps require no outside power, completely self contained
•Recovers up to 90 l/m, use up to 108m total hose length – Use with one or two pickup devices
•Air throttling system allows you to independently control the suction for precise control over pickup devices when using varying lengths of hose
•2 x 98 litre lightweight non-corrosive polyethylene hexagonal separation tanks w/ 1.5” sludge/solids drain & removable Stainless Steel lids
•Easy 1 plug connection for transfer pump power and high water level shutdown
•Debris filters protect pumps and blower motor
•Large 30 litre fuel tank integrated into frame base while keeping a small footprint
•Requires 2” diameter vacuum hose 108m max.) and 2” diameter discharge hose (31m max.)
•Optional: your choice of vacuum berms, recovery surface cleaners, vacuum accessories, see attached pages
•Main Unit Dimensions & Weight: 44”L x 26”W x 34”H, 425 lbs., Vacuum Tanks: 25″L x 20″ W x 36″H, 24 kg each
*NOTE: Max hose length 108m, vacuum & discharge hose not included, see Vacuum Options & Accessories
ca 24 battery required (not included)
RGV GAS ENGINE VACUUM RECOVERY OPTION
PART#	DESCRIPTION	Weight
HYD ATP36	Solids/Sand Separation Tank	28 kg

 

HYDRO VACUUM® PARTS & ACCESSORIES
Hydro Vacuum® Recovery Options – All Models
A MUST-have for all new vacuums as a startup bundle & great for anyone wanting to expand the applications of their existing equipment.
Includes: 1) 25’ Vacuum Hose w/ 2” Cuffs, 1) 50’ Vacuum Hose w/ 2” Cuffs, 1) 12” Vacuum Scupper for 2” Vac Hose,
1) 14” Squeegee Tool, 1) Aluminum Carpet Wand w/ 1-1/2” Attachment & 2” to 1-1/2” Adapter for Carpet Wand,
3 Pack of Dry Work Filters, 1) 6’ Hydro Dike Water Berm* & 2) 10’ Sand Bag Dams**
*NOTE: Requires 20lbs of Small Pea Gravel (NOT INCLUDED)  **NOTE: Sand Required (NOT INCLUDED)
	VACUUM ACCESSORY BUNDLE
	PART#	DESCRIPTION	WT lbs
	HYD ASF10	Vacuum Accessory Bundle	42
ATP40
	VACUUM HOSE & ACCESSORIES
	PART#	DESCRIPTION	WT lbs
	ATP40	5’ Hydro Vacuum Arch, Fits 2” Vac Hose,75-200CFM Req.	7.2
	ATP64	Vacuum Scupper, Fits 1.5” Vac Hose, 6” Wide	1.6
ATP75	ATP75	Vacuum Scupper, Fits 2” Vac Hose, 12” Wide	2.8
	DHV05	Cuff, Fits 2” Vacuum Hose	0.24
	DHV25	25’ x 2” Vacuum Hose	9.2
	DHV50	50’ x 2” Vacuum Hose	18.1
DHV25	DHV51	Connector, Fits 2” Vacuum Hose	0.2
	VWV56	Carpet Wand	2.1
	VWV61	Adapter, 1-1/2” to 2” Vacuum Hose	0.3
VWV61	VWV63	14″ Squeegee Tool	1.0

WATER CONTAINMENT FILTRATION
PART#	DESCRIPTION	WT
VFH08	Filter Housing, 20” x4.5”, 1” Inlet/Outlet, Double O-Ring Seal	8.15
VFH03	Replacement O-Ring, Fits VFH08, Fits VFH08 – 2 Required	0.01
VFW04	Filter Wrench, Fits VFH08	2
VFH10	Filter, Pleated Carbon, 10 Micron, 20” x 4.5”, Fits VHF08	1.65
VFH07	Filter, Pleated Polyester, 20 Micron, 20” x 4.5”, Fits VHF08	1.7
VFH25	Filter, String Wound, 20 Micron, 20” x 4.5”, Fits VHF08	2.3
VFH50	Filter, String Wound, 50 Micron, 20” x 4.5”, Fits VHF08	2.3
VFB05	Filter Bag, 7” Diameter x 32” L, 5 Micron	0.45
VFB10	Filter Bag, 7” Diameter x 32” L, 100 Micron	0.4
VFB41	Duo-Flow Dirt Bag, 7” Diameter x 26” L, 400 Micron Mesh Top,	0.3
	100 Micron Bottom
VFBS2	Replacement Filter Basket, 12” x 9.5”, 1000 Micron,	0.5
	Fits AZV, RZV & RGV Models
VFBS8	Replacement Filter Basket, 8” x 9.5”, 1000 Micron, Fits RPV Models	0.3

 

	WATER CONTAINMENT ACCESSORIES
	PART#	DESCRIPTION	WT
	VB040	Hydro Carbon Oil Absorption Pillow, 40lb Capacity, 18” x 6”	1.5
	ZMAT2	2’ Sand Bag Dam (Sand Not Included)	0.8
	ZMAT6	10’ Sand Bag Dam (Sand Not Included)	3.15
	ZMAT7*	6’ Hydro Dike Water Containment Berm	1.2
	*NOTE: Requires 20lbs of Pea Small Gravel (Not Included)