OSMOBIL MAX for SolaTecs Brush Systems

Description

Even those who want to do without a buffer tank when cleaning louvres with the GTR from Cleantecs previously had no choice.
This is now changing with the OSMOBIL MAX.

• The new OSMOBIL MAX is our response to the ever-increasing demand for mobile osmosis systems for large volumes of water.
• In PV cleaning in particular, there are cleaning projects and cleaning technology that could no longer be adequately supplied with pure water using conventional osmosis systems.
• For example, rotating brushes such as the SOLA-TECS W or the Cleantecs lamella remover.

Water volume – 750 litres of pure water per hour:
The OSMOBIL MAX has a nominal pure water capacity of 750 litres per hour and only requires a 230 volt connection. One of our aims in developing this osmosis system was to achieve this water output without having to rely on a power connection. We have achieved this with the intelligent and speed-controlled pump of the OSMOBIL MAX, which enables additional features.

Technical data
Permeat performance	max. 750 l/h
Yield	40 -75%
Mains connection	230 V und 50 Hz
Inlet water pressure	2,0 – 6,0 bar
Inlet water temperature	8° – 25° C
Ambient temperature	3° – 40 ° C
Dimensions (H x W x D)	ca. 136 x 59 x 59 cm
Weight (dry)	ca. 95 kg
Item no.	0502272

Special features

• 750 litres of clean water nominal capacity per hour
• X-Flow system for direct connection to high-pressure devices, pumps, valves and co.
• three connections for telescopic poles and co.
• Specially for the operation of large solar cleaning robots
• Device can be tracked via the OSMOBIL Cloud on the web
• 6 months free access included. (from December 2024)
• recycling option for water savings (up to 25% in total)
• intelligent pump with automatic volume control and dry-running protection
• can optionally be used for automatic filling of tank systems
• digital control display incl. membrane output
• . Membrane performance
• robust & made in Germany

Intelligent, speed-controlled pump:
The OSMOBIL MAX has automatic dry-running protection thanks to its permanently speed-controlled high-performance pump for example. The device constantly adjusts itself to the amount of water available.
Even if you are on a construction site with poor water pressure, the machine runs smoothly and confidently. It nails and bangs nothing. The only thing is that less clean water comes out of the machine than with a correspondingly strong water pipe.
If you want to push the machine to its limits, you need a water pipe that delivers at least 1500 litres per hour, ideally at 4-6 bar pressure. This allows you to produce well over 750 litres of pure water per hour. In practical construction site tests, we have achieved up to 900 litres per hour with very good inlet pressure (even in summer with quite warm tap water). As with all smaller OSMOBIL osmosis systems, we also use high-pressure technology for the OSMOBIL MAX, thus reducing the effort required for pre- and post-filtration.
The water can be used directly after the membrane – even for glass cleaning! – can be used directly after the membrane. Before delivery, all OSMOBILs undergo a hardness test and must achieve a conductivity of less than 10 PPM with input conductivity values of up to 660 PPM (approx. 33°DH).
In the case of the OSMOBIL MAX, this is an outstanding 6 PPM, which corresponds to a so-called salt retention of over 99%

Water saving with the recycling function:
Another special feature of the machine is the built-in recycling function, which allows you to save water under certain conditions.
When using this function, the appliance feeds part of the waste water with a high mineral content into the supply line and thus reduces the amount of water that is drawn from the tap .
If the incoming water quality is below 400 PPM (i.e. from the medium-hard range), the OSMOBIL MAX display will show you a recycling symbol – this is your signal to switch on the corresponding valve and save water!

The OSMOBIL MAX can also work as a clean water filling station:
The tank filling function should also be mentioned in this context. The OSMBOBIL MAX therefore already includes the complete range of functions of the OSMOBIL BOX control unit, which has been familiar for years.
The matching float switch incl. cable can be found in our shop if required. This makes it easy to fill various tank systems automatically.

OSMOBIL CLOUD:
Finally, the OSMOBIL MAX is the first participant in our OSMOBIL CLOUD. A web service that makes the machine trackable, documents GPS data, monitors input guide values and will combine many other services in the future.
With every OSMOBIL MAX you get a 6-month trial membership in the cloud (first online from December 2024).

Downloads