Auto Electric Submersible Pump 480A

$747.00 exl. GST

Auto Electric Submersible Pump 480A

SKU: 124 LB-480A


The LB/LB-A series are submersible single-phase portable drainage pumps. The discharge direction is selectable between vertical and inclined to prevent the folding or bending of the discharge hose. Every LB-series is slim design enough to be accommodated in an 8-inch pipe. The LB-A series with an innovative electrode-type relay unit automatically starts and stops the pump to eliminate dry-running.


  • Automatic start/stop the pump.
  • Anti wicking cable offers maximum protection against water penetrating through the cable entry should the cable be damaged extending the life of your pump.
  • 50 mm discharge direction that is selectable between vertical or inclined.
  • Thermal motor protector.
  • Dual mechanical seals with silcon carbide face provides 5 times higher corrosion wear and heat resistance than tungsten carbide.
  • Performs like the non-automatic version in every aspect of construction site usage requiring a tough and durable pump.
  • No control panel or float switches are required.
  • Performs like the non-automatic pump with no special float installation required.
  • Requires very small space to operate – only 8 3/4″ diameter.
  • Urethane, Semi Vortex Impeller and Wear Plates for maximum durability while maintaining pump performance.
  • Oil Lifter provides lubrication of the seal faces. (Patented)
  • V-Ring Seal Protector designs mechanical seals from abrasive particles.
  • Environmentally friendly, reducing electrical costs and operational noise. (Technical Features of EL Relay Unit (Level Sensor)
  • Sensitive electrodes detect water to start pump operation even when foreign materials are present.
  • Internal timer eliminates frequent on/off operation in rough water to extend motor life.
  • Relay sensor is completely moulded in resin and covered by a rubber case for protection against rough handling.
  • Job site tested for more than 30,000 on-off cycles without failure or damage.


  • Max Flow: 250 L/min
  • Max Head: 11 m
  • Motor Type: 240 V – 0.48 kW
  • Motor Output: 2/3 hp
  • Phase: Single
  • Discharge Bore: 2″
  • Impeller Type: Semi-vortex urethane rubber
  • Cable Length: 10 m
  • Dimension: 189 mm W x 286 mm Height
  • Continuous Running Water Level: 5.08 cm
  • Pump Weight: 11 kg
  • Starting Method: Capacitor run
Contact Us.Send us an email.