Dynamic Restorer

Description

Dynamic Restorer 5 Lts

Formulation with high concentration, urea hydrochloride
strong but with significantly less fuming than hydrochloric acid.
Removes mineral residues such efflorescence, grout haze, rust stains, soap scum, tyre marks, limescale, and mortar messes effectively.

Skin that comes into temporary touch with an acidic cleaner does not immediately burn; you have some time to rinse it off.

Some corrosive evidence may be evident with aluminium.

How to Use

* Most important before use that the MSDS sheets are read in full
* PPE, must be worn. Wearing protective gloves, suitable clothing and safety glasses
TEST  ON A SMALL AREA PRIOR TO USE,  PAY ATTENTION TO ACID SENSITIVITY BEFORE FULL APPLICATION.

Dynamic Restorer is very concentrated and must be diluted with tap water. Recommendations for use are:

• Efflorescence, rust marks – 1 part Dynamic Restorer to 10 parts water.
• Grout haze, limescale, soap scum – 1 part Dynamic Restorer to 20 parts water

* Pour, brush, or spray mixed solution generously onto the surface and leave for 2 to 5 minutes.
* Do not allow the solution to dry out, so do manage areas at a time
* The surface can be scrubbed
* Flush or pressure clean the surface thoroughly with tap water.
* Dynamic restorer is highly acidic and can etch certain surface materials such as marble, limestone, travertine, and onyx.